Monday, 6 July 2015
Friday, 9 November 2012
Daunting tasks I can no longer put off . . . .
Having made the rudder, the next job was the tiller - but this would have to be shaped to clear the motor which I hadn't, at that point, bought. So what size and make of motor???
The most general rule of thumb seems to be 1 hp per 500 lbs of boat weight. My best estimate of weight with 2 adults and assorted kit on board is around 600 kg - say 1200 lbs - so that a 2½ hp motor should be ok. However, most motors this size don't have a reverse - you have to swing them around 180 to go in reverse so that the tell tale them sprays into the boat. For a reverse gear you seem to need at least a 4 hp motor, so this is what I opted for. Any more would seem superfluous since this length of hull is never going plane or go beyond about 5 knots; if I find myself facing a 5 knot current, no amount of hp will take me forward.
As for make of motor, I compared all the technical stats. until my head hurt and I concluded that it actually doesn't matter all that much - so I bought a black one!
Now I was in a position to construct the outboard well.
The first thing to do was to make an accurate mockup of the outboard well in chipboard and then to mount the motor in it so as to gauge the minimum size of cutout in the hull. The plans allow for the motor to tilt up into the boat so that the cutout needs to be long enough to permit this. It would be possible to cut out a small circular hole to clear the prop. and then lift the motor straight upwards but it weighs 26 kg and then there's nowhere to stow it, so an elongated cutout seemed a beeter option. It looked like this:
a template is bonded in place which will serve as a base for hull inserts; lots of small holes can be seen here to guide the cutting out. The result is this showing the cutout and the resultant hull section that is to be used as a plug-in when the motor is removed:
The plug-in gets a lip bonded to it with seals on the underside which then fits back into the cutout and is held in place by button catches.

An identical insert is then shaped but with a cutout and gasket fitted to go around the otboard leg. The gasket is 2 mm neoprene. On the underside of the hull, a 2nd gasket is fitted forward of and overlapping the 1st.
Then I could at last fit the motor and then I could shape the tiller.
The most general rule of thumb seems to be 1 hp per 500 lbs of boat weight. My best estimate of weight with 2 adults and assorted kit on board is around 600 kg - say 1200 lbs - so that a 2½ hp motor should be ok. However, most motors this size don't have a reverse - you have to swing them around 180 to go in reverse so that the tell tale them sprays into the boat. For a reverse gear you seem to need at least a 4 hp motor, so this is what I opted for. Any more would seem superfluous since this length of hull is never going plane or go beyond about 5 knots; if I find myself facing a 5 knot current, no amount of hp will take me forward.
As for make of motor, I compared all the technical stats. until my head hurt and I concluded that it actually doesn't matter all that much - so I bought a black one!
Now I was in a position to construct the outboard well.
The first thing to do was to make an accurate mockup of the outboard well in chipboard and then to mount the motor in it so as to gauge the minimum size of cutout in the hull. The plans allow for the motor to tilt up into the boat so that the cutout needs to be long enough to permit this. It would be possible to cut out a small circular hole to clear the prop. and then lift the motor straight upwards but it weighs 26 kg and then there's nowhere to stow it, so an elongated cutout seemed a beeter option. It looked like this:
a template is bonded in place which will serve as a base for hull inserts; lots of small holes can be seen here to guide the cutting out. The result is this showing the cutout and the resultant hull section that is to be used as a plug-in when the motor is removed:
The plug-in gets a lip bonded to it with seals on the underside which then fits back into the cutout and is held in place by button catches.
An identical insert is then shaped but with a cutout and gasket fitted to go around the otboard leg. The gasket is 2 mm neoprene. On the underside of the hull, a 2nd gasket is fitted forward of and overlapping the 1st.
Then I could at last fit the motor and then I could shape the tiller.Tuesday, 17 July 2012
Incidental stuff that I didn't think would take long!
I'd left the rudder assembly until now due to lack of space in my workshop/polytunnel. However, the time came to construct a sort of slipway from the polytunnel into the outside world (or my back garden as it's sometimes called) so that work could proceed.
The rudder plans show two cheeks spaced apart by the thickness of the rudder but of course, if you do this you end up with a rudder firmly clamped between the cheeks which really need a couple of mm extra space to allow the rudder to swivel. I also inset some 1 mm tunfnol washers in both the cheeks and the blade to help smooth the swivelling.
I find these drop rudders a bit of a pain in use, so routed out a recess in the blade to hold about 2 kg of lead (this being enough to counter the buoyancy of the blade). Hopefully then, I'll only need a single line to raise the blade - really no telling until it's in the water. (Voice from the future: 2 kg wasn't enough; 3 kg probably)
The decoration shown is of course quite unnecessary and matches some equally pointless art nouveau on the bow - but I like it!
Next came the spars - nice lengths of Douglas Fir - which, after simply hours of planing and rasp work, came to resemble mast, boom and yard - finished with about 10 coats of oil. I'm presently working on the fittings and rigging - but more of that in a future post.
Also, today I started to plan the outboard well detail - something I've been putting off for as long as possible. I really, really don't want to cut an opening in the hull and I don't yet have an motor - huge expense - pact with the devil possibly called for!
Saturday, 10 March 2012
Doldrums
For what seems like months (largely because it has been months!) there has been little progress - due almost entirely to low temperatures. Too cold to varnish, paint or use epoxy. Also, the polytunnel has been dripping constantly which really mucks up fresh epoxy. Now at last work is under way again but I confess I'm not one of the world's great varnishers. Nevertheless, I'm out there day after day rubbing down and applying coat after coat and hoping that I don't die before it's all completed. The base coats are of gloss but the finishing 2 coats will be Hempel's Dura Satin which seems far more in keeping with a trad. boat.
To distract myself, I've bought the sails - gorgeous dark tan from Sail Register - and am scouring the web for motors and trailers - neither of which I can currently afford. Surprisingly (or perhaps not) there's little information as to a suitable size of motor - just have to be guided by the size of the outboard well - probably a 4 - 6 hp with low pitch prop. Also, none of the advertised trailers seem to suit this style of hull so may end up visiting the local blacksmith again. Odd that there are no trailer manufacturers in Scotland. At least the low temps. haven't preventing progress with fitting 15 m of brass keelband (which involved a lot of lying underneath 300 kg of boat!) and the result looks quite smart. The locker lids and catches have also been completed and a couple of really cool bronze fairleads from Classic Marine have been fitted; almost looking ship shape now!


Monday, 14 November 2011
Blocks and stuff
Two years now since I first bought the plans and although I'm about £3000 poorer, I do have what is recognisably a boat in my back garden. I've also learned a great deal on the job and have an increased - and possibly ill founded - confidence in introducing modifications as work proceeds.
The centreplate has now been fitted and removed several times whilst I played about with various pulleys systems for operating it. The plate weights 50 kg and, due to the length of the lifting arm, requires a force of 63 kg to lift it: a couple of triple blocks reduces this to about 19 kg - manageable.
Now this pulley business turned out to be more complicated than I realised. First of all, the mechanical advantage of a pulley system (I think nautical people call it the 'fetch') can be seen from the number of lines leading to and from the moving block, so that a single moving block has two lines (fetch of 2 x) unless it has a becket when the mechanical advantage becomes 3 x. This, however, is only the theoretical advantage as each pulley rotates against friction: using a Barton single block I found by experimenting that about 8% of the force applied was used to overcome friction = 92% efficient. But, this friction goes up as the mass to be lifted increases and down once the pulley starts rolling. Also, ever wonder why some blocks have bigger pulleys than others? It's not to do so much with breaking strain but with the fact that the force needed to overcome pulley friction is inversely proportional to the diameter of the pulley.
With a couple of triple blocks (with the becket on the fixed block) I had a theoretical mechanical advantage of 6 x but with each of the six pulleys needing about 10% of the force applied to counter friction. The formula for calculating the force, F, needed to shift mass M therefore is given by:
- where f = the % of force used to overcome friction per pulley (so 10% would be 0.1), n = the number of pulleys and m = the mechanical advantage
.
It gets worse! Because the tension in each of the lines feeding to and from the pulleys is different (by the amount needed to overcome friction) one block will tend to twist in relation to the other. This results in the tension in each line being applied at a slight angle (reducing its effect a little) and can also lead to one or more of the lines fouling one or more of the others - particularly as the blocks approach close to each other. (Fiddler blocks avoid this tendancy to twist since the pulleys are not side by side.) To reduce this possibility, some thought needs to be given to how the lines are fed through the blocks (reeving), some examples from Harken and Barton being shown below.
A related consideration is the size of the line used; I'm not sure why but a 3 mm line seemed to require less force than a 4 mm which, in turn, seemed more efficient than a 6 mm - possibly the chances of one line fouling an adjacent one are reduced with smaller lines. Of course, it needs to be borne in mind that the likely tension in a line shouldn't exceed about 15% of the breaking strain (important for shrouds) or about 25% where tensions are less likely to vary a lot (like my centre plate).
It sounds just about impossible to arrive at an accurate estimate of line tensions in pulley systems - I mean you really have to admire those Vikings - but, somewhat to my surprise, the eventual force needed to raise my centreplate was just over 20 kg - near enough to the theoretical figure of 18.6 kg.
Saturday, 30 July 2011
Costs
The current costs at the end of July (£2643) represent the expenditure on the basic coble hull in 9mm ply, together with seating, lockers, floor, and foredeck. It also includes varnish and paint, a battery (£60 - which many builders won't need), an auto bilge pump (£53), anchor (£35) and a 10mm steel centreplate (£150). In other words, a floatable hull can be built for about £2300 - not at all a bad cost considering the price being asked for boats these days.
Looking ahead, a trailer will cost about £800, a motor £1000 and then the sails and spars will probably account for another £1000. With the addition of ancilliary items, a sum of about £6000 should see a well set up boat ready for sailing. Checking out the prices asked for new boats of comparable size this does seem to represent a considerable saving - perhap as much as a further £6000 - but this is all pretty speculative. I think that in idle moments, I try to persuade myself that it's all worth the time and effort whereas, in reality, it was never to do with saving cash but with the pleasure of construction.
Progress continues to be slow - locker lids are fiddly and coats of varnish need to dry. The centreplate is more massive than suggested on the plans and weighs in at 47kg but the reinforced structure of the centreboard case and the use of bronze bearings to help spread the load, should ensure that no undue strain is produced. To raise the plate a straight force of 53kg is required so will probably need a couple of triple blocks to reduce this pull down to about 9kg. Some experimenting needed here of course. The more immediate problem is dropping the plate into the case and then removing it several times over before final fitting; friends will help once but more than that is asking a bit much - possibly some sort of hoist will have to be built. To have the plate galvanised proves to be pretty expensive and I'm thinking that I'll use the same Hempel 2-part primer that I used on the outer hull - very hard finish and suitable for metal, wood and glass fibre.
The quoted weight for the boat using 6mm ply is 170 kg; using 9mm you'd expect about 255 kg and in fact the current weight - including centreplate is around 300 kg. Even with motor, mast, sails, etc. the final weight should be a bit under 400 kg.
With the floors down the amount of space is quite impressive - certainly enough for sleeping under a boom tent. This was achieved by setting the side benches/lockers back a bit to follow the hull curve more. The floors rest on rubber strips since the vibration of a motor commonly causes constant irritating, sqeaking and rattling from floors that aren't screwed down.
Finally, having installed a battery to feed the auto bilge pump, it's as well to provide additional power outlets. Hence, the mini switch board.
To maintain my sanity and motivation, I enjoyed a couple of brief jollys recently; one to the trad. boat festival at Port Soy - which seems to have dropped in visitors compared to last year (in spite of the appearance of Iain Oughtred), and one to Lindisfarne where, of course, I spotted several working cobles.
The quoted weight for the boat using 6mm ply is 170 kg; using 9mm you'd expect about 255 kg and in fact the current weight - including centreplate is around 300 kg. Even with motor, mast, sails, etc. the final weight should be a bit under 400 kg.
With the floors down the amount of space is quite impressive - certainly enough for sleeping under a boom tent. This was achieved by setting the side benches/lockers back a bit to follow the hull curve more. The floors rest on rubber strips since the vibration of a motor commonly causes constant irritating, sqeaking and rattling from floors that aren't screwed down.
Finally, having installed a battery to feed the auto bilge pump, it's as well to provide additional power outlets. Hence, the mini switch board.
To maintain my sanity and motivation, I enjoyed a couple of brief jollys recently; one to the trad. boat festival at Port Soy - which seems to have dropped in visitors compared to last year (in spite of the appearance of Iain Oughtred), and one to Lindisfarne where, of course, I spotted several working cobles.
Monday, 13 June 2011
Checking the order of things
Having decided to lengthen the foredeck, it now extends over the fore end of the side benches. In other words, I needed to complete the side benches first. Now I can sympathize with those who opt for simple open benches with perhaps bouyancy bags beneath, but a boat this size is capable of more ambitious journeys, which calls for more storage, which in turn requires lockers rather than simple benches. This turned out to be fiddly and slow going, particularly as construction needs to take account of what is likely to go in and through the lockers. I've planned for an auto bilge pump so that a 19mm tube goes from the keel line up to the gunnel (through a locker), a battery to power the pump is housing in one of the lockers and electric cable has to pass to the pump and to other possible power outlets - for lighting or whatever. But most complicated of all, lockers need access hatches which are preferably water tight - which is, of course, impossible. My hatch seal design may or may not work - we'll see. (Voice from the future: it didn't work and the hatches needed to be replaced - hgh!)
The lockers that abut the transom are much larger and hatch covers may be a problem - I may be tempted by ready made ones - haven't decided yet.
Flooring comes next but first a couple of coats of bildge and locker paint should make the inner hull look a whole lot smarter. From the photos it may seem that I work in an organised and uncluttered fashion - huh! - far from it. Most of the time, every horizontal surface is covered with tools and materials, sawdust and shavings - I think of it as creative chaos!
Sunday, 17 April 2011
Completed this year?? - no chance
There really hasn't been a lot of progress over this last winter - due partly to low temperatures and partly to equally low finances. Now at least it's getting warmer but a Robin’s nest has appeared on one of my tool boxes. Last year it was Swallows.
Reading other boat building blogs, I've only rarely seen mention of running out of cash, but the steady drain on financial resources needs to be anticipated by anyone planning this sort of project. I've increased my monthly expenditure from £150 to £200 but this is about at my limit. To make things worse, the costs will clearly increase as the boat nears completion: several steel parts need to be made up and galvanised, and then there will be paints and varnishes, rigging and tackle, sails, trailer, motor, and all that assorted sailing junk beloved of most sailors. I just try not to think about it . . . .
Recent weeks have been devoted to the centreboard case - strengthened to take a considerably heavier 12mm steel centreplate in place of the 9mm ply one shown in the plans. So 12mm sides are used with hardwood reinforcement about the pivot point. The pivot bolt is increased from 12 to 20mm and additionally rests in 28mm bronze bearings set into both the case sides and the centreplate. Before assembling the case, it's as well to make a 12mm ply pattern of the centreplate to ensure its fit and movement. This pattern can also be used to calculate the weight of the eventual steel plate. To do this, weigh the wooden pattern and then weigh, say, a quarter square metre of the same thickness ply: then divide the first weight by the second weight to derive the area of the plate and then its volume. Multiply by the density of mild steel (about 490lbs / cu. ft. or 7.85gms / cc) and, for this boat, you'll get something in the region of 35kg. When vertical (dropped) the plate will be relatively easy to move up through, say, the first 15 degrees or so, but, as it approaches the horizontal, the force on the lifting arm of the plate can be 2 - 3x the plate's weight, depending on the direction of pull. In other words, lifting gear must be used to reduce this about 4 times (two double blocks, one with a becket should do it but a drum winch might be ok). To prevent the raised plate from bouncing up and down a keeper bolt towards the aft end of the case is also advisable.
As can be seen the floor bearers are deep and substantial providing extra support to the case. Additionally, a length of 20 x 75mm floor will be bonded to both the bearers and the case on both sides of the case to form a rigid backbone at this point.
Elsewhere, the extension aft of the foredeck made it seem advisable to build in a stowage locker for anchor, chain, warps, etc. – might look quite nice or might just look silly . . . .
I remain totally absorbed and excited by this project and only dimly recall the days when I had a sort of social life . . . .
Thursday, 11 November 2010
Just a bit of fancy
Work has slowed down quite a bit now. Epoxy is slow to set in the lower temperatures and I also have to stick to a monthly expenditure of about £150. To avoid the winter condensation in the workshop/polytunnel - heavy enough sometimes to make it look as though it had rained inside - I've lined the inside walls with bubblewrap and it seems to do the trick. The cold wet weather has also prompted me to clean the place up a bit so that I'm now not tripping over loose offcuts, cables, etc. Long ago, when I was trained as an engineer, leaving the workshop spotlessly organised at the end of each day was almost like a sacred commandment - every tool in its place and not a shaving in sight. Sadly, I have to report that the lesson didn't stick.
However, the framework towards the bow has progressed a little and I'm starting to think about the centreboard casing, the base for which needed to be widened on either side of the hog. I'll use a 10mm steel centreplate - weighing about 35kg - which will require a beefed up structure to hold it, especially the pivot bolt size and the doublers but that looks increasingly as though it won't happen until after Christmas.
The most pleasing stage though has been the completion of the gunnels complete with shaped spacers. These are totally unnecessary but I just like the look of them (of course, they hark back to the early boats where frequent ribs ended at the gunnels). In theory, this type of gunnel is a bit stronger and you could tip the boat on its side to drain it - yeah right! - it's getting heavier by the moment - about 125kg now. One lesson I've learned from past experience is to make the spacers thick enough (eg min. 15mm) so you can get a) a paint brush and b) one of your fingers between the inwale and the outwale.Another bit of progress is that I've found a mobile crane operator who was confident of being able to lift the finished boat from the back to the front of the house. Now that was a relief! I plan to sell tickets for the performance!
Wednesday, 13 October 2010
Fiddly templates and more brooding
Did I really say that after turning the hull, everything would be straight forward???? I mean, what planet was I on? Practically everything that is fitted inside the hull turns out to be a really weird shape, involving cardboard templates and loads of wood rasp and spokeshave work; all takes ages - but then what's the rush? - winter is on its way, and epoxy resin work is going to become limited by the low temperatures. In this connection, the resin supplied by Fynne Boats congeals in the tin below 9C whereas with the West System, it's the catalyst that seems to get a bit treacle-like at low temps. The helpful people at Fynne Boats suggested heating the resin in a jam pan - and it seems to work OK - nice and runny once more - but I'm not sure I'll risk making jam again.
Anyway, after making sure that there was no fore and aft twist in the bare hull, I fitted the breasthook and knees at the transom, followed by scarphed mahogany lengths for the outwale and the rubber spaced one plank below it. The outwale is OK to fit as it's easy to clamp but the rubber below it had a lot of twist along its length and needed to be screwed from inside the hull. The steps in the knees and breasthook are to allow spacers between outwale and inwale - looks fancy!
The frame shown seems a long way foreward of the transom but this is to allow the outboard to swing up into the boat. For this reason this frame is reinforced by a 40 x 85 oak beam at the top edge to take the inboard 'outboard'. If you don't need the engine to swing up, then a simple small outboard well would do and this frame could be moved aft a bit.
The upper edge of the transom is framed with 12mm mahogany inside and out, with a lip on top - should give a bit of character when cleaned up, etc.
At the bow end, the second frame is fitted - with opening for an inspection hatch. It get more complicated here as I'm planning to fit the mast in a tabernacle just aft of this frame, so the top of the frame is reinforced by a cross beam and the kingplank is more substantial than on the plans. The foredeck is to be extended back to Frame B position but I'm omitting this frame - leaving it open here - with the aft edge of the foredeck and kingplank supported by a laminated cross beam. The idea is to drop a vertical support from the centre of this beam to brace the foreward end of the centreboard case.
The oak samson post looks rather splendid but is not glued in position yet.
I've raised the foredeck to just 100mm below the gunnels and have introduced a camber - 'cos I think it looks nice! The refs. by John Leather and Peter Cook spell out the necessary details for this; or try: http://www.joliebrisemodels.co.uk/tenth/calculator.html
All other framing is omitted and replaced where needed by ribs - I think - maybe. There's an awful lot of time, at this stage, spent walking round the hull brooding . . . .
Sunday, 5 September 2010
Turning the Hull
Purely to offer some protection to the hull while work continues, a coat or two of undercoat seemed advisable. I used Hempel's two part epoxy which certainly gave a very tough finish but, working with about a litre for each coat, I found that the pot life (in theory between 2 - 6 hrs depending on temperature) wasn't quite long enough. The mix started to drag a bit towards the end so that the finish at the end wasn't as good as at the start; need to work with 1/2 litre mixes in future.
The hull plus mould weighed about 120kg and since there wasn't room to lift the hull cleanly off the mould, I had to turn the whole thing onto its side, push it up against one wall and then let it down the right way up. (Thanks for the help John and Graham).
I had designed the mould with removable sections in the frames so that it should lift cleanly away from the hull - Ha! - in my dreams. Once the removable sections had been taken out, the mould was clearly free of the hull (thanks to all the sellotape used) but lifting it free was a bit like pushing a very fat drunkard up a spiral staircase; I gave up! In the end I had to resort to cutting the mould into three sections before the hull was at long last revealed. (Thanks to Sarah and Peter for help with the fat drunkard). At this stage the bare hull weighs 72kg.
Even without ribs or frames the bare hull is pretty solid - probably due to the rigidity of 9mm marine ply - but care will have to be taken that no slight twist from bow to stern creeps in. The order of work now is firstly to trim the upper edge of the sheer strake (with the aid of temporary pins as shown), then fit the breast hook and knees, then the outer gunnel and rubbing strip.
Glad to have finished the planking - the rest looks pretty straight forward - except for the outboard well which I reckon will be a real problem.
Sunday, 8 August 2010
Finishing the hull - August 2010
With the planking complete and the outer stem in place, it remained to fit the skegs and cut the centreboard slot. I extended the stem back to the transom using 25 x 20mm oak, leaving a 25mm gap for the slot - this offered a reasonable base for a router so that the slot cutting posed no particular problem (long cutter needed though - 12 x 60mm). The hull is reassuringly sturdy at this stage, so that I can clamber about on top quite safely. Sitting astride the hull and cutting the centreboard slot was a bit like inseminating a small whale! - I imagine (not that I imagine this sort of thing much!- well, not at all actually . . . .)The rubbing strips on either side are likewise of oak.
The skegs worried me a bit though; the positioning seems at first to be close to the centre line but if moved further apart they would need to be proportionately deeper. From the plans, the skegs already measure about 220mm at their deepest point, and at only 18mm thick, this seemed to me awfully vulnerable to sideways knocks, etc. The original cobles were recovered by dragging the boat, stern first, up the beaches, so that the skegs would be exposed to considerable wear, loads and possible twisting motions. On hard standing, the boats would have a 3 point support from the two skegs and the deep forefoot, leaving the centreboard area clear of the ground. My eventual compromise was to make them 30mm at the base tapering to 18mm, where they were capped with oak strips; I also reduced their depth and flattened the profile so that, on a hard surface, the foreward support would be just ahead of the centreboard slot. The oak strips running up the transom simply add further strengthening, similar to one or two of the cobles I'd seen on my Northumbrian visit. Later on I'll run a through bolt into a floor bearer for each skeg (I feel a bit like one of those early Victorian engineers, who over-engineered everything - just to be on the safe side!). Also at a later stage, I'll attach some keel banding but it's horribly expensive and I just can't bear to buy it just now. With the skegs in place, the hull has a decidedly fish like appearance.
It remains to give the whole hull a protective coat of resin before the 'interesting' task of turning it over. I'm using clear epoxy for the strake at the sheerline and several layers of Hempel's (Blakes as was) epoxy undercoat for the rest.
The mahogany gunnels and rubbing strips, I've decided to fit after turning the hull. I'm interested to see the weight of the hull once the mould is removed.
Wednesday, 28 July 2010
Wasps show how it's done! - July 2010
My comment in June that insects are attracted to routers seems to be borne out by the appearance of a wasp nest in the shed where I use an overhead router. I find these things amazing; the colours are quite striking and the result is surprisingly strong. Perhaps appropriately, the wasps seem to favour a clinker method of construction and I'm watching with interest to see how their work proceeds.
The coble hull now has all its strakes and I'm hoping to have it ready to turn over within the next month. As can be seen, the strakes were cut easily from just 6 sheets of ply.
The plans suggest laminating the outer stem in situ but I chose to build mine up from sections of oak, 28 x 45mm instead of the 20 x 25mm on the plans. This seems more in keeping with the sturdiness of the hull and allowed me to deepen the forefoot much as the cobles I've seen in Northumbria.
Fixing will be with 6mm s/s studding once the mould is removed.
I'll also use oak on either side of the centreboard slot, then down the centre line to the transom.
However, first the skegs have to be fitted and I have a slight problem with these. The plan details skegs 18 x 220mm at the deepest point and, to my mind, these won't survive a sideways swipe when grounding, beaching, etc. I'm thinking 30mm at the base with through bolts - but we'll see . . . .
Subscribe to:
Posts (Atom)
Sources
London Stainless Fasteners Ltd. www.londonstainless.com - (great range of nuts, bolts, washers, etc. and you can buy them singly.)
Sitebox. www.thesitebox.com/ (stainless steel bolts).
Fyne Boat Kits UK. www.fyneboatkits.com (kits, plans, wide range of materials, information and advice)
Force4 Chandlery. www.force4.co.uk (marine chandlers)
Selway Fisher. www.selway-fisher.com (marine design, plans, advice)
The Battery Masters. www.batterymasters.co.uk (batteries suitable for marine use)
Classic Marine. www.classicmarine.co.uk (general marine tackle, bronze screws & nails, full range of Oughtred plans).
Robbins Timber. www.robbins.co.uk (large range of timber, fixings, resins)
Sail Register. www.sailregister.co.uk (sails & covers to measure).
Wires.co.uk. http://wires.co.uk (copper wires suitable for stitch & glue construction).
East Coast Fibreglass Supplies. www.ecfibreglasssupplies.co.uk (resins, fillers, matting, brushes, etc.)
Prism Plastics. www.prismplastics.co.uk (plastic washers, spacers, etc.).
Marinestore. http://marinestore.co.uk (general marine chandlers - esp. bronze screws)
Bosun’s Locker. www.bosuns.co.uk (chandlery andmarine brokerage)
Sitebox. www.thesitebox.com/ (stainless steel bolts).
Fyne Boat Kits UK. www.fyneboatkits.com (kits, plans, wide range of materials, information and advice)
Force4 Chandlery. www.force4.co.uk (marine chandlers)
Selway Fisher. www.selway-fisher.com (marine design, plans, advice)
The Battery Masters. www.batterymasters.co.uk (batteries suitable for marine use)
Classic Marine. www.classicmarine.co.uk (general marine tackle, bronze screws & nails, full range of Oughtred plans).
Robbins Timber. www.robbins.co.uk (large range of timber, fixings, resins)
Sail Register. www.sailregister.co.uk (sails & covers to measure).
Wires.co.uk. http://wires.co.uk (copper wires suitable for stitch & glue construction).
East Coast Fibreglass Supplies. www.ecfibreglasssupplies.co.uk (resins, fillers, matting, brushes, etc.)
Prism Plastics. www.prismplastics.co.uk (plastic washers, spacers, etc.).
Marinestore. http://marinestore.co.uk (general marine chandlers - esp. bronze screws)
Bosun’s Locker. www.bosuns.co.uk (chandlery andmarine brokerage)


























